en

CONSTRUCTION SYSTEMS

DECORATIVE FACADE COATINGS BASED MINERAL

ADMIXTURE SYSTEMS

"AĞDAĞ" Gypsum - construction gypsum

"AĞDAĞ" Gypsum - construction gypsum

Product consumption calculator


Preorder


Terms of use

Print


Product description

High quality, environmentally friendly, white color, construction gypsum, obtained as the result of treatment of natural gypsum stones at the required temperatures. The product conforms to the requirements of the AZS 046 (TS 370) standard.

Fields of Application

This product can be applied in the following areas:

  • construction works inside buildings;
  • production of mouldings and covings;
  • production of gypsum panels and suspended gypsum ceilings

Advantages

  • easy application and use;
  • does not form cracks;
  • durable;
  • provides heat and sound insulation;
  • resistant to temperature, environmentally friendly;
  • harmless for the human health;
  • possess natural gypsum glitter;

Application procedures

Preparation of the surface. Before making mouldings (decorative gypsum products) and covings pay attention to the wall and ceiling surfaces: they should be checked for strength. Clean the surface from residues deteriorating adhesive force. Then, to obtain smooth and even surface the walls and ceilings should be treated with AGDAG primer and AGDAG white plaster.

Preparation of the mixture. Gradually pour 10 kg of AGDAG Gypsum into 6.5 - 7.0 liters of water, then mix for 2-3 minutes using special mixer or any suitable hand tool.

Application. Use the prepared mixture for construction works inside buildings, making decorative gypsum products (mouldings and covings), suspended gypsum ceilings and gypsum panels. The prepared mixture should be used within 8-12 minutes. The Kartonpiyer mixture should not be used after expiration of useful life.

Recommendations. At the time of application the ambient and surface temperatures should be above or equal to +50C. If at the time of the product application the ambient temperature exceeds the limits of +50C - +300C range, then the required temperature should be provided. The product should not be used in warm (above +300C), rainy and windy weather conditions. The can and the equipment used for preparation of the mixture should always be clean. Dirty cans and tools reduce the useful life of the mixture. After use all hand tools and devices should be immediately cleaned with water. It is recommended to use a rope or artificial fiber for making decorative elements. The risk of spalling of such products may be reduced by placing the rope or artificial fiber inside the gypsum.

Consumption 

The product consumption varies. Due to the lack of losses during application compared to other gypsums of the same weight the AGDAG Gypsum is more cost-effective because of lower density, and it allows to make by 5% larger total amount of mouldings and covings. It means savings of 150 kg per 100 each of 30 kg sacks of AGDAG Gypsum product.

Shelf Life and Storage Method

The product can be stored during 6 months in packaged sacks in closed areas, in dry conditions, on wooden racks, maximum 10 sacks per rack placed one over another, provided that they do not contact with the floor.

Warnings

  • pay special attention to clean conditions of cans and water used during application of AGDAG Gypsum;
  • do not add to the product any substances other than water;
  • parameters indicated above have been received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the actual ambient conditions these parameters are subject to change.

Warranty and technical support

  • information indicated in technical specifications is based on scientific and experimental data;
  • Matanat А company is responsible for the product quality only;
  • with the exception of cases of works executed under the supervision of the company specialists, Мatanat  А company shall not be liable for any problems occuring due to improper use of the product by other persons;
  • the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
  • for technical support and/or more information please do not hesitate to contact the Matanat А company!