"Filkret 100" repair mortar

"Filkret 100" repair mortar

Product consumption calculator


Terms of use


Product Description

Cement based, enriched with mixtures, surface repairing mixture, provides waterproofing properties for materials, monocomponent. The product conforms to the requirements of the 039-2000 (TS 11140-1993) standard: “Adhesives – cement based (hydraulic conjunction), suitable for glazed, ceramic, and floor tiles”.

Fields of Application

This repair mixture can be applied in the following areas:

  • Repair works in buildings;
  • Providing surface smoothness for painting operations, ceramic adhesive bonding, and insulation works;
  • Filling small cracks;
  • Restoration of crashed, crumbled, broken, torn concrete, plaster, and other similar surfaces.


  • Easy preparation and use;
  • Produces impeccable surfaces on crashed, crumbled, broken units;

Method of application

Preparation of the surfaces. Clean the surface from any residues deteriorating adhesive force. Pay attention to ensuring rigidity of the surface. Prior to application of the product the surface to be used should be dampened or primed with Binmader primer.

Preparation of the mixture. Pour 25 kg of Filkret 100 powder mix to 5.5 – 6.0 liters of water and mix till it is entirely homogeneous (to prepare the mixture it is recommended to use slow circulation mixer). Wait for 3-5 minutes to allow the substances composing the mixture to intermix completely, then mix again before application.

Application. Using trowel completely fill tears and cracks existing on the surface. Allowable thickness of the product layer is 1-5mm. The prepared mixture should be used within 90-120 minutes.

Recommendations. If at the time of application of the Filkret 100 repair mixture the ambient temperature exceeds the limits of +50C - +300C range, the required temperature should be provided. The product should not be used in warm (above +300C), rainy and windy weather conditions. After the useful life expiration the mixture in no case should be diluted with water or fresh powder mix. After use all hand tools and devices should be cleaned with water. After hardening the product can be removed from the surface by mechanical means only.


The required amount of  the mixture consumed to obtain 1mm thick layer shall be 1.5-2.0 kg/m2.

Shelf Life and Storage Method

The product can be stored during 12 months packed in original sacks in dry and cold conditions. For the short storage period the sacks can be placed one upon the other in three layers. In case of long-term storage the product packages should not be laid one upon another. The product in unpacked sacks should be used within one week provided the required storage conditions are maintained.


  • as the Filkret 100 repair mixture is based on cement, when using, please observe the regulations of operational and personnel safety, wear appropriate protective clothing, safety gloves, glasses, and respirators;
  • taking into consideration that the product can cause allergic reactions and itch, take care to avoid contact of its components with skin or eyes, otherwise immediately rinse them with large amount of water and wash with soap;
  • in case you swallow the product, immediately consult a physician;
  • do not keep food products in the areas of the solution application;
  • keep the product away from children;
  • parameters indicated above have been received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the actual ambient conditions these parameters are subject to change.

Warranty and technical support

  • information indicated in technical specifications is based on scientific and experimental data;
  • Matanat А company is responsible for the product quality only;
  • with the exception of cases of works executed under the supervision of the company specialists, Мatanat  А company shall not be liable for any problems occuring due to improper use of the product by other persons;
  • the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
  • for technical support and/or more information please do not hesitate to contact the Matanat А company!