en

CONSTRUCTION SYSTEMS

DECORATIVE FACADE COATINGS BASED MINERAL

ADMIXTURE SYSTEMS

AZERLIME Lime for plaster

AZERLIME Lime for plaster

Product consumption calculator


Preorder


Print


PRODUCT DESCRIPTION

Lime product for AZERLİME plaster is highly active hydration (caustic) lime made from natural limestone using a special technology. This product is added to the mixture of sand and cement, so that lime plaster is obtained.

Compliant with the requirements of  ГОСТ 9179-77 and TS EN 459-1 standards.

FIELD OF APPLICATION

It is used in plastering, masonry of walls built of brick, sawdust and other types of stones in inner and outer surfaces of buildings and in forming smooth surfaces on the floors in various areas of construction industry.

RULES OF USE

Add water in the amount of 15-18% of the mixture to the finished dry mixture, wait for 3-5 minutes, and then mix. Use ready to use plaster in plastering of the walls made with red brick, sawn stone and other types of stones, masonry works and smoothing surfaces. The amount of dry construction mixtures and water required for the preparation of the finished product is shown in the following table.

İnstruction of finished

mixture

 

Amount of mixtures

(weight)

Amount of mixtures

(scoop)

Mile for plaster

 

5,7 kg

1  scoop

Cement M300

13 kg

1  scoop

Plaster sand

81,3 kg

6  scoops

Amount of required water   

15-18 l

15-18%

 

TECHNICAL CHARACTERISTICS OF LIME PLASTER

AZERLİME

Color                                                   Light gray

Usage temperature                               +50C  -+300C

Water/Lime plaster                               15-18 l water/100 kg plaster

                                                                           

Duration of use                                    120 minutes

Application thickness

minimum                                            8 mm

maximum

(by step-by-step application)               100 mm

Ready to use product density               2100 kg/m3

Product density after drying                1800 kg/m3

Strength limit in:              

bending                                             2 N/mm2          

compression                                      5  N/mm2                                                                                                                                                                                                                                                       

PACKAGING

 AZERLIME the lime product for plaster is packed in 20 kg polyethylene or paper sacks, 500 and 1000 kg polyethylene Big Bag sacks.

STORAGE PERIOD AND PROCEDURE

It can be stored for a year in unopened sacks, under dry conditions, putting on top of each other and being maximum 10.

WARNINGS

Special attention is paid to the cleanliness of the water, the container and the floor when preparation of the mixture using the AZERLIME product.

Do not add any additional substance to the lime and plaster mixture other than water.

WARRANTY AND TECHNICAL SUPPORT

Information in the specifications is based on the scientific and practical knowledge;

“Mətanət A” guarantees that the product complies with the relevant technical requirements and state standards.  

Except for the works performed under the supervision of company specialists, “Mətanət A” is not responsible for any problems that may arise by the other users during the  outsources use;

The company reserves the right to change the product related to the scientific and technical development.

Contact “Mətanət  A” for technical support, or more information!