en

Product categories

CONSTRUCTION SYSTEMS

CERAMIC ADHESIVES

JOINT FILLING MIXTURES

REPAIR AND MOUNTING MIXTURES

WATERPROOFING MIXTURES

HEAT INSULATION MATERIALS

PRODUCTS BASED ON GYPSUM

CEMENT-BASED PLASTERS

PRODUCTS BASED ON LIME STONE

LIME PRODUCTS

PVA GLUES

PAINTING PRODUCTS

DECORATIVE FACADE COATINGS BASED MINERAL

PRIMERS

SURFACE PROTECTION AND SURFACE CLEANING

SURFACE SYSTEMS

CEMENT BASED SURFACE HARDENING MATERIALS

SOLVENT-FREE EPOXIDE BASED MATERIALS

SELF-LEVELLING FLOOR COMPOUND

ADMIXTURE SYSTEMS

CONCRETE ADMIXTURES

MIXED ADDITIVES

CONCRETING ASSISTANT MATERIALS

SUPPORTING MATERIALS FOR GRINDING

AUXILIARY PRODUCTS TO CONSTRUCTION OF UNDERGROUND

"PARMAKET ROZE" adhesive for parquet and universal purposes (pva)

"PARMAKET ROZE" adhesive for parquet and universal purposes (pva)

Product consumption calculator


Preorder


Print


Product description

Polyvinil acetate-based, pink-colored, multipurpose glue rich in specific chemical compounds, and with a high advesive strength. It conforms to the requirements of AZS  082-2003 standard.

Fields of Application

This glue can be applied in the following areas:

  • Adhesive bonding of wood, paper, cardboard, leather, cloth, linoleum, and other materials;
  • Increasing of adhesive strength of facing tiles, as well as different kinds of gypsum and cement-based mixtures.

Advantages

  • Ready for use; easily applied;
  • Has high adhesive ability;
  • Increases adhesive strength of different gypsum and cement based mixtures;
  • Resistant to high temperature up to 1000C.

Preparation of surface. The used surface should be dry and clean. The surface should be totally free of residues preventing adhesion.

Application. Mix before use. Apply thin coat of the mixture onto the surface to be bonded. After 1-2 minutes piece together the surfaces to be bonded, and keep for one day, by pressing. To provide  a strong bonding effect, it is recommended to use it at the temperature higher than +50C. The full adhesive ability will be achieved in 24 hours.

Recommendations. If in the application of PARMAKET Rose product, the ambient temperature is less than +50C and more than +300C,  required temperature should be provided. The glue should not be used in hot (more than +300C) weather conditions. Expired PARMAKET Rose glue should not be used.

Consumption 

The consumption is 0.5-1.2 kg m2 depending on the characteristics of wood, paper, cardboard, leather, cloth, linoleum, and other materials.

Shelf Life and storage 

The product can be stored during 12 months in unopened sacks in dry conditions.

Warnings

  • taking into consideration that the PARMAKET ROZE adhesive is rich in chemical compounds, immediately rinse it with water in case of contact with skin or eyes;
  • do not add to the mixture any substances not mentioned in the ;
  • store in dry warehouses;
  • parameters indicated above were received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the ambient conditions these parameters may be changed.

Warranty and technical support

  • Information indicated in the technical specifications is based on scientific and practical knowledge;
  • “Matanat А" company is responsible only for the product quality;
  • Except for the works carried out under the guidance of the company specialists, “Мatanat  А" company bears no responsibility for any problems that may occur as a result of improper use of the product by other users;
  • The company reserves the right to make changes to its product that may occur due to a scientific and technnological development;
  • For technical support or more information please do not hesitate to contact “Matanat А" company!

These products are used to

"PARMAKET" adhesive for parquet and universal purposes (pva)

Preorder