CONSTRUCTION SYSTEMS

CERAMIC ADHESIVES

JOINT FILLING MIXTURES

REPAIR AND MOUNTING MIXTURES

WATERPROOFING MIXTURES

HEAT INSULATION MATERIALS

PRODUCTS BASED ON GYPSUM

CEMENT-BASED PLASTERS

PRODUCTS BASED ON LIME STONE

LIME PRODUCTS

PVA GLUES

PAINTING PRODUCTS

DECORATIVE FACADE COATINGS BASED MINERAL

"FasMazaik" decorative facade coatings based mineral

PRIMERS

SURFACE PROTECTION AND SURFACE CLEANING

SURFACE SYSTEMS

CEMENT BASED SURFACE HARDENING MATERIALS

SOLVENT-FREE EPOXIDE BASED MATERIALS

"Staltop EX-50" solvent-free epoxide based two-component surface hardener

SELF-LEVELLING FLOOR COMPOUND

ADMIXTURE SYSTEMS

CONCRETE ADMIXTURES

MIXED ADDITIVES

"İzoSem" waterproofing admixture

CONCRETING ASSISTANT MATERIALS

SUPPORTING MATERIALS FOR GRINDING

AUXILIARY PRODUCTS TO CONSTRUCTION OF UNDERGROUND

"EPOKS 200 White" epoxide-based grout-joint filler

Product consumption calculator

Preorder

Product Description

Epoxide resin based joint filling mixture, resistant to chemical substances and bacteria, easily applied for filling joints (pores) of different products, such as ceramics, marble, granite, acid-resisting ceramics, glass mosaic, and glass bricks, washable with water. The product conforms to the requirements of AZS 321-2008 (TSEN 13888) standard.

Fields of Application

This joint filling mixture can be applied in the following areas:

Indoor and outdoor, on horizontal and vertical surfaces;
Filling joints (pores) in such product as ceramics, marble, granite, acid-resisting ceramics, glass mosaic, and glass bricks, glued to the existing surfaces;
Food production facilities of all types, meat and fish production industry, canteens, butcher shops;
Pharmaceutical, dye, paper, battery accumulator, and fertilizer industries, printing houses;
Kitchens of industrial facilities and laundries;
Hospitals conforming to various hygienic requirements;
Swimming pools and thermal springs;
Waste waters treatment and removal facilities;
Trade centers, transport terminals, and other places with busy pedestrian flows;

Advantages

Resistant to chemical substances, acids, alkalis, oils, domestic waste waters, chemical waste waters;
Shows anti-bacterial properties;
Does not promote forming of mould, epiphytes, and bacteria;
Resistant to dirt, facilitates cleaning;
Suitable for filling joints of widths between 2mm and 10mm;
High mechanical strength;
Resistant to freezing and warm weather conditions.
Can be used in areas contacting with potable water;

Method of application

Preparation of the surfaces. Similar to ceramic adhesives, the applied adhesive requires some time to reach the required level of hardness. Before application of solution please take care of the ceramic surface to be used: it should be clean, and any existing contaminations should be removed.

Preparation of the mixture. The EPOKS 200 White product is a two-component joint filling mixture, so it has been packed in corresponding amounts. In case you plan to use only part of the package, the Component A (epoxide resin based adhesive) should be mixed with the hardening Component B in 100%(A)/4%(B) proportion. At the time of application both components should be mixed during at least 3 minutes using 400-600 RPM mixer until the mixture is entirely homogeneous).

Application. Fill the joints in a criss-cross manner with EPOKS 200 White joint filling mixture using plastic or rubber trowel or pneumatic applicator gun filled by means of suction, then strike off extra amounts. In case a joint has large depth make sure it has been filled entirely, as the applied solution can settle. Wait 15-30 minutes depending on the environmental and surface temperature, then clean the surfaces using suitable sponge soaked with hot water and detergent dissolved in it, to achieve required conditions. Frequently replace the contaminated sponge during the cleaning. Substances based on epoxide resin when used to fill the joints (pores) form layers similar to thin film on the ceramic surfaces. Thoroughly remove these layers. If let the moment pass, it will be very difficult to clean. The last thin layer should be removed from the ceramic surface in 4-10 hours after application, with the help of suitable sponge soaked with hot water and detergent dissolved in it. The final cleaning includes wiping the surface using 10% alcohol in water solution.

Recommendations. The EPOKS 200 White solution should be mixed using corresponding mixing unit. It should be thoroughly mixed by hands or using trowel. Period of use and hardening of the products containing solution of epoxide resins depends on the environmental temperature. The most effective operating temperature is +100C - +200C. The prepared EPOKS 200 White solution mixture in no case should be diluted with water or fresh solution. After use all hand tools and devices should be cleaned with warm water with addition of powdered detergent.

Consumption

Amount of consumed joint filling mixture varies depending on dimensions of the facing tiles, width and depth of joints.

Shelf Life and Storage Method

The product can be stored during 12 months packed in original sacks in dry and cold conditions, provided freezing is avoided.

Warnings

continuously ventilate the areas of application of this material;
when using the product observe regulations of operational and personnel safety, wear the appropriate protective clothing, safety gloves, glasses, and respirators;
taking into consideration that the solution can cause allergic reactions and itch, take care to avoid contact of its components with skin or eyes, otherwise immediately rinse them with large amount of water and wash with soap;
in case you swallow the product, immediately rconsult a physician;
do not keep food products in the areas of the solution application;
keep the product away from children;
parameters indicated above have been received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the actual ambient conditions these parameters are subject to change.

Warranty and technical support

information indicated in technical specifications is based on scientific and experimental data;
Matanat А company is responsible for the product quality only;
with the exception of cases of works executed under the supervision of the company specialists, Мatanat А company shall not be liable for any problems occuring due to improper use of the product by other persons;
the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
for technical support and/or more information please do not hesitate to contact the Matanat А company!