en

Product categories

CONSTRUCTION SYSTEMS

CERAMIC ADHESIVES

JOINT FILLING MIXTURES

REPAIR AND MOUNTING MIXTURES

WATERPROOFING MIXTURES

HEAT INSULATION MATERIALS

PRODUCTS BASED ON GYPSUM

CEMENT-BASED PLASTERS

PRODUCTS BASED ON LIME STONE

LIME PRODUCTS

PVA GLUES

PAINTING PRODUCTS

DECORATIVE FACADE COATINGS BASED MINERAL

PRIMERS

SURFACE PROTECTION AND SURFACE CLEANING

SURFACE SYSTEMS

CEMENT BASED SURFACE HARDENING MATERIALS

SOLVENT-FREE EPOXIDE BASED MATERIALS

SELF-LEVELLING FLOOR COMPOUND

ADMIXTURE SYSTEMS

CONCRETE ADMIXTURES

MIXED ADDITIVES

CONCRETING ASSISTANT MATERIALS

SUPPORTING MATERIALS FOR GRINDING

AUXILIARY PRODUCTS TO CONSTRUCTION OF UNDERGROUND

"Ak Deniz" drywall plaster 30 kg

"Ak Deniz" drywall plaster 30 kg

Product consumption calculator


Preorder


Print


ABOUT THE PRODUCT

It is a high-quality, environmentally friendly, fine white gypsum obtained by cooking natural gypsum stone at the required temperature. Complies with AZS 046 (TS 370) standard.

AREAS OF USE

From this product:

in the manufacture of sticks and pads;
It is used in the manufacture of gypsum boards and partition gypsum pans.

ADVANTAGES

easily prepared and applied;
does not crack;
is solid;
insulates heat and sound;
temperature resistant and environmentally friendly;
harmless to human body;
has a natural gypsum luster.


RULES OF USE

Surface preparation. Prior to gluing the plaster and decorative padding, the wall and ceiling surfaces must be inspected and made firm, and the surface must be cleaned of residues that prevent adhesion. After that, to get a smooth and even surface, primer and facing putties should be used for plastering walls and ceilings.

Preparation of the mixture. Sprinkle 10 kg of plasterboard product in 6.5-7.0 liters of water in 30 seconds and mix for 2-3 minutes with a special mixer or hand tool.

Application. Use the prepared plasterboard mixture in the manufacture of decorative gypsum products (plaster and padding), partition gypsum pans and gypsum boards. Work the prepared mixture for 8-12 minutes. Do not use expired plasterboard mixture.

Recommendations. If the ambient temperature of the product is used below + 50C and above + 300C, the required temperature must be maintained. Do not use in hot (above + 300C), rainy and windy weather. The container and equipment from which the mixture is prepared must always be clean. Dirty dishes and utensils shorten the life of the mixture. Equipment and tools should be washed with water immediately after use. It is recommended to use rope or synthetic fibers when making decorative products. It is possible to reduce the risk of breakage and breakage of products by placing rope or special fibers inside the plaster.

TECHNICAL INDICATORS

Color: White

Operating temperature: +50 C ÷ + 30 0C

Hardening time: beginning son 8-12 minutes, 17-22 minutes

Scale of spread: 140-180 mm

Absorption of water: 34-38%

Water / gypsum ratio 6.5-7.0 liters of water / 10 kg of gypsum

Drying time: about 1 day

Strength limit: bending in compression

4.5-5.5 MPa

10.5 MPa

Bulk density of the product in the dry state
Density of ready-to-use solution
0.64 kg / liter, 1.48 kg / liter

Surface strength: 125-130 Shore D

Packaging: In 30 kg laminated polypropylene bags, in 30 kg bags consisting of 2 or 3 layers of kraft paper and 1 layer of polyethylene

 

CONSUMPTION

Consumption is variable. Due to the absence of losses, ACDENIS Carton Pierre is more productive and allows to prepare 5% more mortar and padding, as it weighs less per liter of dry compared to other gypsum of the same weight during use. This means a saving of 150 kg for 100 bags of 30 kg ACDENIS Plasterboard.

STORAGE PERIOD AND PROCEDURE

Packaged bags can be stored for 6 months in closed places, on wooden pallets, in dry warehouses with a maximum of 10 pieces, without touching the floor.

WARNINGS

ACDENIZ Pay special attention to the cleanliness of water and utensils when using drywall;
do not add any additives to the product other than water;
The above parameters were obtained as a result of tests conducted at a temperature of + 230C ± 20C and a humidity of 50% + 5%. These indicators may vary depending on the circumstances.


WARRANTY AND TECHNICAL SUPPORT

the information specified in the technical indicators is based on scientific and practical knowledge;
Matanat A is solely responsible for the quality of the product;
Matanat A is not responsible for any problems that may arise when other users use it outside of the instructions, except for work performed under the guidance of the company's specialists;
the company reserves the right to make changes to the product in connection with scientific and technical development;
Contact Matanat A for technical support or more information!

Preorder