MAIN PAGEinfo@matanata.comSITE MAP
MAIN PAGE

PRODUCTS
CONSTRUCTION SYSTEMS PRIMERS
CERAMIC ADHESIVES
JOINT FILLING MIXTURES
REPAIR AND MOUNTING MIXTURES
WATERPROOFING MIXTURES
HEAT INSULATION MATERIALS
PRODUCTS BASED ON GYPSUM
CEMENT-BASED PLASTERS
PRODUCTS BASED ON LIME STONE
LIME PRODUCTS
PVA GLUES
PAINTING PRODUCTS
DECORATIVE FACADE COATINGS BASED MINERAL
PRIMERS
SURFACE PROTECTION AND SURFACE CLEANING

PARAKONTAKT®

Gypsum plaster bonding coat for concrete walls and ceilings

Product description

A modified polymerization technology, resin based primer increasing hardiness and adhesive strength between the surfaces and cement, especially gypsum based plaster applied onto even concrete surfaces, walls and ceilings.

Fields of Application

This product can be applied in the following areas:

  • indoor areas, vertical surfaces and ceilings;
  • applied as liquid primer creating two-way bonding in order to increase adhesive strength between even surfaces and gypsum, gypsum cement and cement based plasters;

Advantages

 

  • Ready for application;
  • Increases adhesive strength between cement and especially gypsum based plasters and molded concrete surfaces;
  • Does not contain detergents;
  • Prevents fast loss of water in cement and especially gypsum based plasters;
  • Increases useful life of plasters;
  • Saves material consumption.

 

 

Application procedures

Preparation of the surface. Please pay attention to the treated surface: it should be healthy, dry, hard, dust-free, clean, and should have required dimensions. The surface should be totally free of fat, rust and paraffin residues deteriorating adhesive force; there should not be any small defects.

Preparation of the mixture. Pour 10 kg of PARAKONTAKT product into a designated bucket, and gradually add water  in the proportion of up to 1% of the product weight. Prepare this mixture for 3-5 minutes using a 400-600 RPM mixer till the solution is entirely homogeneous.

Application. Apply the mixed and ready to application product onto the preliminary prepared surface using paddle roller. It is necessary to test the absorption ability of the surface prior to application of the PARAKONTAKT product onto the surface. The cement based and especially gypsum based plasters can be applied onto the surface treated with the PARAKONTAKT product in 24 hours after its hardening.

Recommendations. If at the time of the PARAKONTAKT product application the ambient temperature exceeds the limits of +50C - +300C range, then the required temperature level should be provided. The product should not be used on external surfaces. It is important to keep the primer in clean conditions both during application, and after application. The PARAKONTAKT product is not suitable for application in the areas of high humidity (i.e. bath houses, saunas, swimming pools, etc). During application the product should be frequently mixed.

Consumption 
The PARAKONTAKT product consumption is 150-250 g/m2, depending on water absorption properties and smoothness of the surface. The consumption of the product mixed with water is 210-375 g/m2.

 

Shelf Life and Storage Method

  • The product can be stored in original buckets in cool and dry conditions, protected from freezing. For the short storage period the buckets may be placed on wooden racks one upon the other in three layers, and in the time of application the bottom layer buckets should be used first. In case of normal storage conditions the product can be stores for 12 months starting from the manufacturing date.
  • The product in opened buckets should be used within one week.

Warnings

  • immediately rinse the PARAKONTAKT product with water in case of contact with skin or eyes;
  • in case you swallow the product, immediately consult a physician;
  • when using the product wear appropriate protective clothing, safety gloves, glasses, and respirators;
  • keep the product away from children and food products;
  • do not store the product at temperatures below 00C;

Warranty and technical support

 

  • information indicated in technical specifications is based on scientific and experimental data;
  • Matanat А company is responsible for the product quality only;
  • with the exception of cases of works executed under the supervision of the company specialists, Мatanat  А company shall not be liable for any problems occuring due to improper use of the product by other persons;
  • the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
  • for technical support and/or more information please do not hesitate to contact the Matanat А company!

 

 





BİNMADER® 100 BİNDER PRIMER Ready to use

BİNMADER® 200 BİNDER PRIMER