en

CONSTRUCTION SYSTEMS

DECORATIVE FACADE COATINGS BASED MINERAL

ADMIXTURE SYSTEMS

"FasMazaik" decorative facade coatings based mineral

"FasMazaik" decorative facade coatings based mineral

Product consumption calculator


Preorder


Terms of use

Print


Product description

Decorative mosaic plaster containing specific substances, used on internal and external surfaces.

Fields of Application

This facade coating can be applied in the following areas:

  • Internal and external walls of buildings;
  • On different surfaces, such as plaster, concrete, wood, panel, etc.

Advantages

  • Perfect adhesion to surface;
  • Resistant to sea shore humidity;
  • Elastic, does not crackle, does not go to pieces;
  • Very highly resistant;

Preparation of surface. The surface should be totally free of oil, rust, paraffin, and other residues preventing adhesion. In case the surface has cracks or pores, it should be repaired with F-Pas facing paste. The surface should first be primed with Binmader primer, and decorative plaster should be applied to the surface after the primer gets dry.

Preparation of mixture. Thoroughly mix the decorative plaster using poor circulation mixer. To regulate the applied product density add water in small amounts (at most up to 1% of the product).

Application. Apply the decorative plaster using stainless steel trowel in the same direction provided that there is no air gap, and then polish.

Consumption
1 m2 surface can be plastered with 3 kg decorative plaster in 2 mm thickness.

Shelf Life and storage
The product can be stored during 24 months in unopened sacks in dry conditions.

Warnings

  • taking into consideration that this is a complex mixture, immediately rinse it with water in case of contact with skin or eyes;
  • do not add any substances not indicated in the application procedures;
  • parameters indicated above were received on the base of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the ambient conditions these parameters may be changed.

Warranty and technical support

  • Information indicated in the technical specifications is based on scientific and practical knowledge;
  • “Matanat А" company is responsible only for the product quality;
  • Except for the works carried out under the guidance of the company specialists, “Мatanat А" company bears no responsibility for any problems that may occur as a result of improper use of the product by other users;
  • The company reserves the right to make changes to its product that may occur due to a scientific and technnological development;
  • For technical support or more information please do not hesitate to contact “Matanat А" company!